Taskalfa 300ci color issues

[spiderman76]

Possibly, can I remove the Bizhub color table installed on taskalfa?

[kyoceradude]

absurd: You can get the color tables from your tech rep. I'm not sure if they are online from KMA.


spiderman76: To get rid of the installed color table, all you need to do is reflash with current firmware. There is a reset file, but I just reflash firmware.

[Santander]

Turn on the continuous tone. Check this box in the imaging tab on printing preferences and you will see an improvement. Adjust the trapping to medium or heavy to avoid white dots between colors or mis-placement of adjoining colors which leads to a print looking murky.

[spiderman76]

How activeted the Minolta BizHub 451 color table , after upload it on TaskAlfa 250 ????

[Ingersoll]

I have seen people use HP drivers to print to Kyocera copiers/printers and get better color prints. Just point the HP driver at the IP # of the copier. Your results may vary.

[R1200gs]

Hey Kyoceradude,

Just read your post regarding the colortable for the bizzhub and was just wondering,

All I need to do is to upload the 2 files like I would upload new firmware and thats it, when I want to go back just update it with the latest firmware again?, I will go and try this in our showroom to see the effect next week.
By the way we are a certified dealer for Kyocera but always looking for improvements.

Regards,
Robbert

[R1200gs]

Turn on the continuous tone. Check this box in the imaging tab on printing preferences and you will see an improvement. Adjust the trapping to medium or heavy to avoid white dots between colors or mis-placement of adjoining colors which leads to a print looking murky.

Hey Santander,

Where do I adjust trapping, on the hardware or the printerdriver?

[kyoceradude]

Hey Kyoceradude,

Just read your post regarding the colortable for the bizzhub and was just wondering,

All I need to do is to upload the 2 files like I would upload new firmware and thats it, when I want to go back just update it with the latest firmware again?, I will go and try this in our showroom to see the effect next week.
By the way we are a certified dealer for Kyocera but always looking for improvements.

Regards,
Robbert

Correct. Just upload the two files from a thumb drive, and perform the color adjustments.