I'm trying to install a cartadis cm-4000 to kyocera km4050

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Juan1234
    • Sep 2024

    I'm trying to install a cartadis cm-4000 to kyocera km4050

    cartadis works with coins but the problem is that you inset money for one copy or more the problem is that you always can make 1 copy extra and a half.

    Whenever you make de you put more copies in the machine.
    For example you put money for five copies and you try to make more copies in the machine you always could make 1 copy extra and a half.
  • TheOwl
    Service Manager
    Site Contributor
    1,000+ Posts
    • Nov 2008
    • 1733

    #2
    Don't know this model of vendor unit well, but in a lot of other equipment, there is a setting that you can make to adjust the time between counter clicks and the timeout of the vendoe unit.

    Have a look through the manual and see if you can find anything like that.
    Please don't ask me for firmware or service manuals as refusal often offends.

    Comment

    • Juan1234

      #3
      Well, thaks.

      I'll try what you said.

      Comment

      • R1200gs
        Technician
        • Mar 2010
        • 14

        #4
        You'll probably have to set your countertick to registration instead of exit in simulation mode.

        Comment

        Working...