how to installed new prcess unit of FS-1016

[jewen25]

hello pls send me guide to installed new process unit of kyocera fs-1016


thanks

[JustManuals]

This Parts & Service manual can now be purchased for $11.77 and downloaded immediately after payment from The Internet's largest collection of manuals


Paul@justmanuals.com

[randula7]

Drum reset: [MENU] / 1-common setup/17-drum reset
Perform after drum unit replacement to set MC current


Developing unit >Toner installation:
[MENU] / 1-common setup/14-toner install/On > switch off main switch
At switching the machine on, the toner feeding will start for +/- 15 min.
This procedure can also be used to clean the drum or to remove condensation.

[taskalfaman]

just replace the parts.
and go into the menu.
new developer installed.
power Off/on machine.
dev will be filled up again