FS-C5016n Led Array

[vikingmita]

aiaiai. you deserve an applaud for stamina, thats for sure.

faint stripe can be drum, dev, 'brain' or leds. unfortunately my guess is dev. run colour calibration from meny first anyways.

squeaking is prob. exit rollers/shafts as they are plastic in plastic.

partnumbers on internals in 5016 and 5025 are different, so bookwise nothing will be interchangable. seeing as they have different toner, and the fact that the 5025 actually works, i guess it's true in real life too. spend your time on the 5025, dump the 5016

[vk4akp]

Hi Guys, wow it's been so long!

Well some good news!

We now have a 3rd (Number #3) Kyocera FS-c5016N !!! Isn't life wonderful!!.

It's print is the worst of all. But we have not stripped down and cleaned it as yet.
It also comes with a duplexor.

I will post links to pictures and info as soon as I have time to work on it.

Our other FS-c5016N continues to run OK but still with a slight faded stripe in the print.

More FS-c5016N fun to follow soon!

.-.-.

[vk4akp]

Re: FS-C5016n black toner hanging like spiners web from paper?

Hi Guys.

Still playing with these FS-c5016N's.

I think we have about 4 units now (3 for parts).

The one we use has developed a new problem.

When printing as specially when it has sat off for a while all the black toner doesn't stick to the paper.

The prints come out with the black hanging everywhere from the paper like spiders webs.

Any idea what this could be?

.-.-.