If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
There is a toner add drive motor that will cause this type of issue. The drive screw strips out and will not turn the toner augers. So it doesn't add toner. Had somethiong similar do this a few years ago. Check that for now. Good luck
I have allreday change the 2toner sensor,the toner motor and the toner detech sw
Next step is the engin pcb. $$$$$$$
Tanks for the help
Hope too help some on in return
A+
Hi,this may sound foolish but I'll throw it out there,
you have checked that the toner cart is pushing fully into the machine?
maybe you can wedge a folded up piece of paper between the toner cart and the blue toner release handle at the front of the machine to see if it is fully pushed in.
Comment