If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
In the US, the KM-4030 (Falcon 1) uses a Print System N while the KM-4035 (Falcon 2) uses as Print System U. They have different part numbers and different firmwares, so I'm sure they aren't interchangeable.
I know very little about Olivetti, but the 400 looks like it uses a Print System U and Scan System E, just like the European KM-4035 (Falcon 2). I wouldn't know if they are compatible.
Comment