[Error Code] how to fix error code C0610 on Kyocera Mita 181

[Musiwa]

Hi guys,
i have the above machine and is showing error code C0610. Does anyone have a clue?

[JustManuals]

Re: how to fix error code C0610 on Kyocera Mita 181

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[DallasTech]

Re: how to fix error code C0610 on Kyocera Mita 181

C0610 Bitmap (DIMM) problem
There is a problem with the data or
address bus of the bitmap DRAM.
Defective main
PWB.
Replace the main PWB and check for correct
operation.
DIMM installed
incorrectly.
Check if the DIMM is inserted into the socket
on the main PWB correctly.
Defective DIMM. Replace the DIMM and check for correct
operation.


that was copied directly from the service manual. I would check the RAM (DIMM) on the main board and make sure it is installed correctly and it's still there. The DIMM could also be defective, as well.

[Musiwa]

Re: how to fix error code C0610 on Kyocera Mita 181

Thanks for that wanna try it and what is the procedure for going into service mode and clearing the an error code?

[Copystar Tech]

Re: how to fix error code C0610 on Kyocera Mita 181

That code should clear itself once the problem is resolved.