TaskAlfa 400ci colors / registration off

[MFPTech]

TaskAlfa 400ci colors / registration off. The unit has only 100K and according to the SM the PM is required at 300K. Not long time ago had to replace the ITB because it was damaged.


Went over the user adjustments (color adjustments, Drum / dev refresh, etc.) and the registration seems to be a little better, but the colors are still off and the machine does not allow me to do even a grad adjust.


Any ideas please?


Thanks in advance!

[Eric1968]

Re: TaskAlfa 400ci colors / registration off

Clean all drum/dv-units. Replace the black dv-unit by the modified one. Upgrade the firmware to V12.