Taskalfa 300i (Welcome Screen stays on)

[Tomtech]

Hi All.

Does anybody know the remedy for the (WELCOME) screen on the Taskalfa 300i. I have swopped the Panel P.W.B. and the Main P.W.B.

I have checked the Dimm as well.

Thanks

[yakyitz]

Re: Taskalfa 300i (Welcome Screen stays on)

double check that the two usb type connectors adjacent to each other in the main PWB are not reversed and then reflash firmware

[Tomtech]

Re: Taskalfa 300i (Welcome Screen stays on)

Thanks but have triple checked it. The funny thing is when uploading firmware I get a error (I.P Not Found)(File not found) and this happens as the Panel firmware gets uploaded.

[moinabil23]

Re: Taskalfa 300i (Welcome Screen stays on)

hi all
remove the battery and turne on.
it will give you code replaced the battery and reset U906 diseble

good luck
exus for my englaish

[Mooseface2r]

Re: Taskalfa 300i (Welcome Screen stays on)

Sorry what battery? iv got a similar problem.

[moinabil23]

Re: Taskalfa 300i (Welcome Screen stays on)

yes a had the same problem. the battery on PWB ASSY ENGINE