FSC5200 Colour registration

[daveyball]

Hi I have a FSC5200, with colour reg problmes, I have attached a sample, looks to far out to be Tramsfer unit. Any Ideas?

[banginbishop]

Re: FSC5200 Colour registration

yep there is a colour reg section under the menu section - cant remember where - same as a km-c2525 where you can line it all up again.

[daveyball]

Re: FSC5200 Colour registration

yep there is a colour reg section under the menu section - cant remember where - same as a km-c2525 where you can line it all up again.

Tried that but I'll give it a go agian, swa something in the tech bulletins, about preswcribe commands, not sure I'm convinced on that, could they affect it that far.
Ta

[Jules Winfield]

Re: FSC5200 Colour registration

Magenta appears to be way off, much more than the other colors. Try reseating the magenta drum unit, dev unit, and LED unit and then run color registration.

[banginbishop]

Re: FSC5200 Colour registration

Tried that but I'll give it a go agian, swa something in the tech bulletins, about preswcribe commands, not sure I'm convinced on that, could they affect it that far.
Ta

remember, if the reg is so far out the scales will still not line up you have to keep adjusting them till they line up in the middle on the scale and by the looks of it yours are miles out.

[komakino]

Re: FSC5200 Colour registration

if you run prescribe command it will reset registration back to normal had this problem and tried countless times to adjust in colour registration mode (detail and mormal) to no avail. ran prescribe and registration went back to spot on

[Zackuth]

Re: FSC5200 Colour registration

banginbishop
remember, if the reg is so far out the scales will still not line up you have to keep adjusting them till they line up in the middle on the scale and by the looks of it yours are miles out.

I've had to do the registration something like 9 times to bring the lines into place. It'll take time, but should work.

[taskalfaman]

Re: FSC5200 Colour registration

solved or not?
please check Sb in att. and please feedback.