FS-C5200 Yellow Crooked

[yakyitz]

The original problem was an e2250. I replaced the Main charger cleaning motor. Now The yellow is printing crooked. I performed detail registration, calibration reseated drum dev units. Still no good. I swapped yellow and cyan drum units to see if the problem follows the drum unit. It doesn't. The problem is still with the yellow. Could it be the laser unit? There in only one polygon mirror in these units Any Ideas? Iv'e attached a sample print

[JustManuals]

Re: FS-C5200 Yellow Crooked

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

Paul@justmanuals.com

[yakyitz]

Re: FS-C5200 Yellow Crooked

Thanks Paul but I have the manuals. It's an odd problem in my view. Just trying to see if anyone's got any other ideas or also thinks that it could only be the laser unit.

[Kidaver]

Re: FS-C5200 Yellow Crooked

Have you tried swapping the transfer belt? I had a problem similar to this and it was the belt...