If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Where can I get the Konica-Minolta color table file? I've heard it prints "blacks" better than the KMA table. Also, if anyone has instructions of how to load it; it would be appreciated.
I have been trying these out. when it works it really does make things a lot better! just load the laest firmware, then in service mode U130 just set colour tables 1 and 2 to which one you want (i have found toshiba "to" or konica minolta "ko" best) then in the print driver set the colour profile under the image tab to custom tables. We are having reports of the first batches of these machine not accepting the colour table firmware. awaiting back from kyocera to report on a fix.
I have been trying these out. when it works it really does make things a lot better! just load the laest firmware, then in service mode U130 just set colour tables 1 and 2 to which one you want (i have found toshiba "to" or konica minolta "ko" best) then in the print driver set the colour profile under the image tab to custom tables. We are having reports of the first batches of these machine not accepting the colour table firmware. awaiting back from kyocera to report on a fix.
Comment