5500i fuser seperator claws/fingers

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • Venom
    replied
    Re: 5500i fuser seperator claws/fingers

    Originally posted by Tebow83
    you can use the claws off the old km2050 fuser.
    The new ones are very badly made.
    agree...they seem to be chipping off, I just replaced a fuser for folding front corner....went through thinking it was the holes in the bridge unit or the gate in the attachment kit but the perfectly good looking fuser caused it

    Leave a comment:


  • Tebow83
    replied
    Re: 5500i fuser seperator claws/fingers

    you can use the claws off the old km2050 fuser.
    The new ones are very badly made.

    Leave a comment:


  • dickierock
    replied

    Leave a comment:


  • Dickie
    replied
    Re: 5500i fuser seperator claws/fingers

    What is the olivetti equivalent model number?

    Leave a comment:


  • Eric1968
    replied
    Re: 5500i fuser seperator claws/fingers

    If it's just one broken separation claw, maybe you can remove it and put the fuser back in the machine. Most of the times they work fine with only one missing.

    Leave a comment:


  • taskalfaman
    replied
    Re: 5500i fuser seperator claws/fingers

    hi,

    you have to buy a complete fixing unit.
    llu ( long life unit) 3 years warranty.

    Br

    Leave a comment:


  • dickierock
    started a topic 5500i fuser seperator claws/fingers

    5500i fuser seperator claws/fingers

    Does anyone have a part no. for the fuser seperator claws for 5500i?
    They're not listed in the Kyocera or Olivetti parts manual.Seems ridiculous to have to buy a whole fuser / maintenance kit for the sake of
    a broken sep claw.
    Thanks.
Working...