Re: Firmware problem
Got this sorted, I had been using the files your post although I think you just need the two to load engine firmware.
After trying every trick I know to get it to load the firmware it still kept failing at the engine update so I tried loading the same files on one of our workshop machines and it updated successfully. I then swapped the engine board out of this machine and put in the other one, loaded engine firmware and done a full upgrade so I assumed that it was the engine board was faulty...
Out of curiosity though I put the "faulty" board into the other machine and attempted to load the firmware, it worked fine so I returned it to its original machine and both now both are up, running ad fully upgraded. I'm not sure if it was a loose connection because it's never had any major work done on it before but hey all's well that ends well I guess.
Ps: it's been mentioned before but the key to these problems when using the boot switch is infinite bloody patience, my lack of which meaning we needed to get in two code dimms instead of one.
Got this sorted, I had been using the files your post although I think you just need the two to load engine firmware.
After trying every trick I know to get it to load the firmware it still kept failing at the engine update so I tried loading the same files on one of our workshop machines and it updated successfully. I then swapped the engine board out of this machine and put in the other one, loaded engine firmware and done a full upgrade so I assumed that it was the engine board was faulty...
Out of curiosity though I put the "faulty" board into the other machine and attempted to load the firmware, it worked fine so I returned it to its original machine and both now both are up, running ad fully upgraded. I'm not sure if it was a loose connection because it's never had any major work done on it before but hey all's well that ends well I guess.
Ps: it's been mentioned before but the key to these problems when using the boot switch is infinite bloody patience, my lack of which meaning we needed to get in two code dimms instead of one.
Comment