Taskalfa 180 USB print issue

[Rouge70]

Hi all,
i have problem with taskalfa 180 connected usb to a pc with win7 64. when i send a print job the machine start printing after 2 minutes. I know thet GDI driver is not working good with win7 64, i solved the same problem on KM1635 disabling bidirectional on usb port, but with 180 it does not work. Any tips?

[Venom]

Re: Taskalfa 180 USB print issue

maybe turn ramdisk on

[Rouge70]

Re: Taskalfa 180 USB print issue

Thanks Venom, ramdisk also helps.
I found out that gdi copiers like km1635/2035 and taskalfa 180/220 connected usb and also with IB-110 can have problems printing when they enter in sleep mode. Is better to turn off sleep mode by setting U344 to 0 and F51 to off. Another thing that can cause problem printing on gdi machines is Status Monitor, uncheck it from printer preferences. Dont use the driver provided by windows update but download driver from Kyocera site. IB-110 must have the latest firmware. Always uncheck bidirectional mode from usb port in printer properties.