Copystar CS 305 replace toner error

[gideon]

This copier is less then 1 year old, used only original Kyocera toner, try to replace the toner with 2 new original toners and still get the error "replace toner cartridge with original", any experience with this problem? There is no error number only the message.
I have the manual, and i suspect the RFID (RFPWB) board is the problem, even so I have 3.3v (pin4 yc12 EPWB).
The container switch (tcsw) operate normally, the toner lock sensor (tcls) give me only 1.8v instead of 3.3v (pin12 yc12 EPWB) but I guess that it will tell me that the toner locked not to replace the cartridge.
How do you get to the RFPWB, (not in my manual)?
Thanks.

[Tonerkiller]

Re: Copystar CS 305 replace toner error

There is a bulletin on this you need an eng or main board I do not remember which one. Look on kda.

[gideon]

Re: Copystar CS 305 replace toner error

This copier is less then 1 year old, used only original Kyocera toner, try to replace the toner with 2 new original toners and still get the error "replace toner cartridge with original", any experience with this problem? There is no error number only the message. I have the manual, and i suspect the RFID (RFPWB) board is the problem, even so I have 3.3v (pin4 yc12 EPWB).The container switch (tcsw) operate normally, the toner lock sensor (tcls) give me only 1.8v instead of 3.3v (pin12 yc12 EPWB) but I guess that it will tell me that the toner locked not to replace the cartridge. How do you get to the RFPWB, (not in my manual)? Thanks.

I don't have this bulletin, will you be kind and send it to me, gideon@countrycopy.com, I'm working.g on Mira for 25the years but I'm not a n authorized tech so I have no access to the new bulletins.Thanks