Buenas Tardes, donde puedo conseguir el firmware para una Kyocera Taskalfa 250ci
Kyocera Taskalfa 250ci
Collapse
X
-
manolo moralesTags: None
-
manolo morales
-
-
Re: Kyocera Taskalfa 250ci
I have it, but it isn't free. If interested, email me at paul@justmanuals.com.Comment
-
Sannu
Re: Kyocera Taskalfa 250ci
What is the exact problem. Upgrading firmware from time to time is good but not needed if the machines dose not show any problems that surten firmware is created for.
TASKalfa 250ci has several issues that lead to poor print quality and most of them are not related to firmware.Comment
-
Re: Kyocera Taskalfa 250ci
What is the exact problem. Upgrading firmware from time to time is good but not needed if the machines dose not show any problems that surten firmware is created for.
TASKalfa 250ci has several issues that lead to poor print quality and most of them are not related to firmware.Comment
-
Sannu
-
Re: Kyocera Taskalfa 250ci
I cannot tell from that print go to maint mode and print out a color belt sample print on 8x14 inches or larger. If there are dots of a certain color measure the distance between dots to tell if it is fuser, drum, or belt.Comment
Comment