CS-1820 Maint Mode?

[Sgt. Hulka]

How do I get into the maintnance modes on a Copystar CS-1820? 10871087 didn't work for me.

[Mark B]

system menu key scrul to service press start # and enter key select maintance key press enter

[kyoceradude]

Enclosed is the Maintenance Section for a KM-1820 which is essentially the same as the CS-1820. If you have a fuser error make sure you have the top cover open when you turn on the machine. They neglect to tell you that in the manual. Hope this helps.

[Guest]

Press the system menu/counter key.
Select Service.
Hold down "Start" and "#", press "enter".
Select Maintenance mode.
Press "enter".
Select desired maintenance mode, press "enter".
Turn power off and on to exit maintenance mode.

[Sgt. Hulka]

thanks everyone, I will check it out on monday

[kyoceradude]

Moo moo moo moo

[Susie321]

Enclosed is the Maintenance Section for a KM-1820 which is essentially the same as the

CS-1820. If you have a fuser error make sure you have the top cover open when you turn on the machine. They neglect to tell you that in the manual. Hope this helps.

I have been having problems with my CS-1820 your information helped.


Thanks a million!
Susie