Kyocera FS -C2626mfp jamming

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Danwood007
    Technician
    • Feb 2013
    • 36

    #1

    Kyocera FS -C2626mfp jamming

    Danwood007
    Junior Member


    Join Date
    Feb 2013
    Posts
    7
    Rep Power
    0
    Kyocera FS-C2626mfp jamming
    I've got this machine intermittently not picking up paper from the paper tray. Customer says it mostly when they put paper in the tray and reinsert the tray. It grabs the paper , very slightly,then stops. I tested it for 20 mins without a jam but customer insists this happens often. I've already fitted the feed tyres last week, so they are brand new.
    has anybody had paper feed jamming problems on this model?
    thanks
    Share
  • copymech
    Trusted Tech

    100+ Posts
    • Sep 2011
    • 196

    #2
    Re: Kyocera FS -C2626mfp jamming

    The paper out actuator can bind to paper when paper is raised. The angle needs to be changed slightly to prevent this from happening. Some techs will place a single sheet in tray and insert. If the actuator penetrates the paper then it needs to be shimmed slightly back.

    Comment

    • Caldo
      Technician

      50+ Posts
      • Nov 2007
      • 69

      #3
      Re: Kyocera FS -C2626mfp jamming

      Originally posted by Danwood007
      Danwood007
      Junior Member


      Join Date
      Feb 2013
      Posts
      7
      Rep Power
      0
      Kyocera FS-C2626mfp jamming
      I've got this machine intermittently not picking up paper from the paper tray. Customer says it mostly when they put paper in the tray and reinsert the tray. It grabs the paper , very slightly,then stops. I tested it for 20 mins without a jam but customer insists this happens often. I've already fitted the feed tyres last week, so they are brand new.
      has anybody had paper feed jamming problems on this model?
      thanks
      Share

      Have a good look at the actuator and make sure it is in angle, try also to test print a single sheet and see what happens on the output result?

      Comment

      • lees
        Technician

        50+ Posts
        • Apr 2011
        • 95

        #4
        Re: Kyocera FS -C2626mfp jamming

        Kyocera does have some information on this problem if it is happening from the 250 sheet tray. Call them and request the information.

        Comment

        • print1

          #5
          Re: Kyocera FS -C2626mfp jamming

          Anyone else having paper feed problems on the Kyocera rear feed printers and MFP's? Fs-5150,5250, 2026,2126,2526 &2626's, clicking noise when the paper lifts, paper jams in back of machines, stream feeding, have changed paper feed and retard assy's, paper, etc. also tried removing the white piece in the 250 sheet feeder, we'll see if that helps, If you work on these Kyocera models my guess is you are having these problems. Error codes are J0501, J0502, J0511, J0512, J4020, kYO service manual is quite vague to say the least.

          Comment

          • JustManuals
            Field Supervisor

            5,000+ Posts
            • Jan 2006
            • 9838

            #6
            Re: Kyocera FS -C2626mfp jamming

            This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


            Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


            Paul@justmanuals.com

            Comment

            • print1

              #7
              Re: Kyocera FS -C2626mfp jamming

              Thanks but we are a Kyocera dealer and I am a trained technician and have all the service manuals, was just stating that the service manuals are extremely vague and if you call Kyo tech hotline on this problem they don't seem to have an answer to the problem.

              Comment

              • wseyller
                Service Manager

                1,000+ Posts
                • Sep 2012
                • 1129

                #8
                Originally posted by print1
                Thanks but we are a Kyocera dealer and I am a trained technician and have all the service manuals, was just stating that the service manuals are extremely vague and if you call Kyo tech hotline on this problem they don't seem to have an answer to the problem.
                At that point (if no resolve) we request technical onsite support.* This usually results in Kyocera DSM contacting the tech for a hopeful working resolve. In fact there was at least one time where kyocera gave up and replaced the entire machine because the tray lift motor would not shutoff at the proper moment.



                Sent from my Galaxy Nexus using Tapatalk 2

                Comment

                • madas
                  Trusted Tech

                  250+ Posts
                  • Aug 2008
                  • 313

                  #9
                  Re: Kyocera FS -C2626mfp jamming

                  Hi, This was on a FS-C2126, I had one where there was a problem with the little white lever under the m/c, remove tray and look under the m/c at the back on the left. it was stuck and this caused clicking noise also we had one that jammed intermittant which was something to do with the tray, it somehow interfered with the 2 little arms that move near the rollers.
                  sorry I did not do the last one so all I know is that it left 2 dents in the paper. you have to trick the door and watch for this one. J501 was the code.

                  madas

                  Comment

                  Working...