CS305 Red Line on Scans

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • cbs
    Technician

    50+ Posts
    • Apr 2011
    • 86

    #1

    CS305 Red Line on Scans

    Customer reports a red line on scanned documents; any thoughts?
  • Jules Winfield
    Senior Tech

    500+ Posts
    • Jul 2009
    • 821

    #2
    Re: CS305 Red Line on Scans

    Go through all the optics and make sure they are clean...
    But I'm trying, Ringo. I'm trying real hard... to be the Shepherd.

    Comment

    • madas
      Trusted Tech

      250+ Posts
      • Aug 2008
      • 313

      #3
      Re: CS305 Red Line on Scans

      Not sure what a CS305 is but I had a couple of these issues and adjusted U68 this is only for the doc feeder home postion of the lamps.
      it might not be relevent but if it is i hope it helps.
      also if you have all the calibration charts do them.

      madas

      Comment

      • Zackuth
        Trusted Tech

        250+ Posts
        • Aug 2009
        • 448

        #4
        Re: CS305 Red Line on Scans

        I've had this several times on different machines, the slit glass has a red line on it-from a highliter or some such. My customers didn't get anything on b/w copies or scans, but color scans they did. Just clean the slit glass really good.
        If at first you don't succeed, redefine success

        Comment

        • madas
          Trusted Tech

          250+ Posts
          • Aug 2008
          • 313

          #5
          Re: CS305 Red Line on Scans

          Just looked up the model and is a smart m/c which has this U68.
          one I had only showed lines when using using doc feeder and only on scan to pc/email not on copies.
          I adjusted U68 to 20 gone for good.

          madas

          Comment

          Working...