My company recently took over the contract for a couple of Kyoshiba machines. Being that this design was purchased from Toshiba, this is a completely foreign machine to me. Two of the machines are calling for periodic maintenance, 0108, and 0008. I'm not familiar with those codes, and I was hoping someone here might be. Thanks.
-
-
Re: CS 750c Maintenance 0108, 0008
you can get these manuals from KDAconnect or Paul if you don't have access to that site....the 0008 is a K process unit....the other...and this is where it gets a bit weird and takes a bit of researching....is if you have more that one PM item needing replaced it adds up the 4 digit code....0008 is Black Process Unit....0100 is "Parts other than the PM parts of the process unit" so you have your K process unit and something else....you'll need to get into one of the modes and check your counters..the machine will list what is needed...I can't remember it off the top of my head tho as thankfully we only have 1 of these machines left and we rarely get calls on it..."In a cruel and evil world, being cynical can allow you to get some entertainment out of it."
Comment