FSC5150DN F000 ERROR

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • cbs
    Technician

    50+ Posts
    • Apr 2011
    • 86
    #1

    FSC5150DN F000 ERROR

    Tried multiple PWR cycles and loading new FW; no luck

    I've seen posts related to memory DIMM issues but this machine doesn't have any memory expansion installed. Service manual says Main PWB or User Panel. Any thing else to check before I start swapping boards?
    Tags: error, main, manual, memory, panel, service, service manual, start, user
    • DWise
      Senior Tech

      500+ Posts
      • Apr 2010
      • 895
      #2
      Re: FSC5150DN F000 ERROR

      Try reseating the connections on the Main PWB and the Control Panel
      Do for one what you wished you could do for everyone. - Andy Stanley

        Comment

        • HenryT2
          Senior Tech

          500+ Posts
          • Apr 2010
          • 962
          #3
          Re: FSC5150DN F000 ERROR

          Try disconnecting ALL data connectors and power cord....wait several seconds and just plug the power cord .
          Power on , then hook up the data cables .

          Sometimes this is just a communication error ..........
          "The Serenity Prayer" . . .
          God grant me the serenity to accept stupid people , the courage to not waste my time and energy on them , and the wisdom to know that I cannot fix STUPID .

            Comment

            • linuxgyro
              Technician
              • Oct 2012
              • 45
              #4
              Re: FSC5150DN F000 ERROR

              i had an f000 error recently on a brand new fsc-2626 main pwb. i reordered a second main board and the problem was corrected.

                Comment

                Previous template Next
                Working...