kyocera KM-4530

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • TEC DOG
    Trusted Tech

    100+ Posts
    • Sep 2011
    • 113

    #1

    kyocera KM-4530

    Hi

    Can't clear message.Display shows waste toner almost full.Clear counter 921,empty box and cleaning sensor didn't help.Any suggestions?
  • Zackuth
    Trusted Tech

    250+ Posts
    • Aug 2009
    • 448

    #2
    Re: kyocera KM-4530

    Make sure the clear tab is clean on the inside. Other than that, it might be time to retire this machine. Parts might be an issue to find as Kyocera no longer supports this machine.
    If at first you don't succeed, redefine success

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838

      #3
      Re: kyocera KM-4530

      This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


      Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


      Paul@justmanuals.com

      Comment

      • TEC DOG
        Trusted Tech

        100+ Posts
        • Sep 2011
        • 113

        #4
        Re: kyocera KM-4530

        Originally posted by Zackuth
        Make sure the clear tab is clean on the inside. Other than that, it might be time to retire this machine. Parts might be an issue to find as Kyocera no longer supports this machine.
        Thanks Zack.Maybe you know when i restart copier why counter for waste toner always come back to 540K after resetting?

        Comment

        • blackandwhite
          Technician

          50+ Posts
          • Aug 2012
          • 67

          #5
          Re: kyocera KM-4530

          may be the counter is not resetting correctly...that is what u are getting the same message....how u are clear the counter?.....press zero key twice then press start key....may be it will work.....

          Comment

          Working...