TA 5550ci

[kaborwen]

Hi all.
I need the Combined FIRMWARE UPGRADE PACK 5.00 or newer for TA 5550ci please.
Thx.

[JustManuals]

Re: TA 5550ci

I have it but it isn't free. If interested, email me at Paul@justmanuals.com

[neweggeek]

Re: TA 5550ci

hey i have a link for that 5.0 and 6.0. let me know if you still need it

[kaborwen]

Re: TA 5550ci

hey i have a link for that 5.0 and 6.0. let me know if you still need it

Hi,
Ho! yes I need the 6.0 please, Cause my problem is still.
I opened the yellow LSU and I found that the small lens, at the side of the polygon motor, was moved. I reinstalled, but no change.
Thanks.

[taskalfaman]

Re: TA 5550ci

Hi,
Ho! yes I need the 6.0 please, Cause my problem is still.
I opened the yellow LSU and I found that the small lens, at the side of the polygon motor, was moved. I reinstalled, but no change.
Thanks.

fw will not solve your issue.

have fun

[Eric1968]

Re: TA 5550ci

So you have a problem with the Laser Unit, and the machine should also give some kind of Service Call. Like Taskalfaman says, firmware will not solve it. If you have problems with the optics in the Laser Unit, the best thing to do is to replace it. All the optics are adjusted in the factory and you will never be able to adjust it yourself.

[neweggeek]

Re: TA 5550ci

this wont fix your issue but is is good to upgrade.

https://mega.co.nz/#!Q5NHiYhB!bu3J9VYbGGA7I0oXqzUQR0j_BE5Z71jPPtP6_vrM-wQ

firmware 6.0 and parts manual

[kaborwen]

Re: TA 5550ci

After upgrade firmware and fix the lens, all is working well. Thx all