kyocera task 250 ci error code 9540

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • kibbs
    Technician

    50+ Posts
    • Apr 2013
    • 94
    #1

    kyocera task 250 ci error code 9540

    dear all.. how to sort this problem..

    in my office one of my technician swap the parts

    i have one machine with the example machine no: qjk1223309

    for testing purpose i removed the main board and engine board..


    i think he removed eprom also from other working machine example mACHINE no:qjk153390

    finally we identified the toner motor problem..

    after that we fix back the all the parts..

    on machine showing the exact machine no: qjk123309 (its working)

    the other machine also showing the qjk123309 and also C9540 error is their..

    how both machine showing the same machine no: qjk123309

    HOW TO SOLVE THE PROBLEM..??
    ALL MY SENIOR TEECHINICAN WANT TO FIX MY ISSUE...


    ~SORRY FOR BAD ENGLISH~

    KIBBS
    Tags: 250, 330, bad, code, error, kyocera, office, tech, toner
    • blsquires
      Trusted Tech

      Site Contributor
      250+ Posts
      • Nov 2008
      • 342
      #2
      Re: kyocera task 250 ci error code 9540

      you can try maintainance mode 004 otherwise it will need the eprom to be reprogramed by kyocera .

        Comment

        • kibbs
          Technician

          50+ Posts
          • Apr 2013
          • 94
          #3
          Re: kyocera task 250 ci error code 9540

          Originally posted by blsquires
          you can try maintainance mode 004 otherwise it will need the eprom to be reprogramed by kyocera .
          yes. i cum to knw by 004 only..!! i want to reprogram by kyocera the eprom.. is their any other way to solve the problem...

            Comment

            • kibbs
              Technician

              50+ Posts
              • Apr 2013
              • 94
              #4
              Re: kyocera task 250 ci error code 9540

              Originally posted by kibbs
              yes. i cum to knw by 004 only..!! i want to reprogram by kyocera the eprom.. is their any other way to solve the problem...
              i was exchange the eprom with other other machine.. still that machine not working..

                Comment

                • Eric1968
                  Service Manager

                  1,000+ Posts
                  • Jan 2009
                  • 2458
                  #5
                  Re: kyocera task 250 ci error code 9540

                  You can not exchange EEPROMS's and NVRAM's. These parts hold machine specific information (Serial Numbers, Counters, Process Control Information, etc). Exchanging them will only give errors and Service Calls.

                    Comment

                    • kibbs
                      Technician

                      50+ Posts
                      • Apr 2013
                      • 94
                      #6
                      Re: kyocera task 250 ci error code 9540

                      Originally posted by Eric1968
                      You can not exchange EEPROMS's and NVRAM's. These parts hold machine specific information (Serial Numbers, Counters, Process Control Information, etc). Exchanging them will only give errors and Service Calls.
                      once i swap the eprom it is working with the other machine know.. i was confused i don't know where start to look..

                        Comment

                        Previous template Next
                        Working...