[Error Code] Transer belt error C7420

[djfenti]

I recently replaced a transfer belt on a TaskALFA 500ci using a TR-855. I got an error code C7420 which indicated that it was a wrong belt for different model. After shutting the machine down and turning it back it worked. I guess my question is, have you had this happen to you and will I run into issues later down the road? Should I concerned about something electrical in the machine messing up? Thanks in advance for looking into my post.

David

[JustManuals]

Re: Transer belt error C7420

This Parts & Service manual can now be purchased for $12.77 and downloaded immediately after payment from:

Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[MDR24]

Re: Transer belt error C7420

C7420 can also mean there is no TX belt connected. Did you reconnect the cable when you had the machine turned off? It's possible to disconnect the belt when you put the fuser unit in. If that's the case it shouldn't cause too much of a issue

[Tonerkiller]

Re: Transer belt error C7420

I would say connector issue also