[Misc] How to get into maintence mode with 10871087 changed in u10 to unknown code

[martinkrys]

Hello
How to get into maintence mode when original 10871087 code has been changed in sim u10? Above issue happens in Taskalfa 250Ci, I tryed almost everything like prescribe commands !R! ACNT “REST”;EXIT; or !R! EGRE; EXIT; to reset machine, newest firmware, nothing helps, initializing system from system menu. Most important is that I can't reset maintence cycle, so machne still claims for a maintence. Service Company that was earlier taking care for this machine, changed maintence code in order to prevent other technician from servicing this machine, now I'm taking care for this Kyocera and such a problem disturbs me a lot. Sorry for my english, regards from Poland

[habik]

Re: How to get into maintence mode with 10871087 changed in u10 to unknown code

Hello
How to get into maintence mode when original 10871087 code has been changed in sim u10? Above issue happens in Taskalfa 250Ci, I tryed almost everything like prescribe commands !R! ACNT “REST”;EXIT; or !R! EGRE; EXIT; to reset machine, newest firmware, nothing helps, initializing system from system menu. Most important is that I can't reset maintence cycle, so machne still claims for a maintence. Service Company that was earlier taking care for this machine, changed maintence code in order to prevent other technician from servicing this machine, now I'm taking care for this Kyocera and such a problem disturbs me a lot. Sorry for my english, regards from Poland

Give me their number and I call them and tell them, that they are C***S

If you look through the forum, you will find the answer to your question the number has been repeated several times!

[martinkrys]

Re: How to get into maintence mode with 10871087 changed in u10 to unknown code

Give me their number and I call them and tell them, that they are C***S

If you look through the forum, you will find the answer to your question the number has been repeated several times!

I was searching this forum, but didn't find any solution, could You please send me some link to a right topic?

[Eric1968]

Re: How to get into maintence mode with 10871087 changed in u10 to unknown code

Do a Google search and add site:www.copytechnet.com after the search phrase. This will give you results from Copytechnet only.

[Sayens]

Re: How to get into maintence mode with 10871087 changed in u10 to unknown code

Try 0614 1010 it should work

[martinkrys]

Re: How to get into maintence mode with 10871087 changed in u10 to unknown code

Try 0614 1010 it should work

Thank You, 0614 1010 works fine, this advice saved me