FS-6025 jamming no wast toner bottle

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Haggy0310
    Junior Member
    • Oct 2012
    • 7
    #1

    [Jamming] FS-6025 jamming no wast toner bottle

    Hi guys,

    I am pretty new to Kyocera. Try to fix a FS-6025 with an odd problem. Copy or print jams all the time in the middle of the fuser unit.
    Remove paper close door. Machine showes wast toner bottle missing. Open close front door starts to print again. Same procedure.
    Replaced exit unit. fuser unit all boards, Developer and drum, checked all sensors OK. Any ideas much appriciated.
    Thanks
    Tags: None
    • BHRLC
      Technician

      50+ Posts
      • Nov 2013
      • 77
      #2
      Re: FS-6025 jamming no wast toner bottle

      Originally posted by Haggy0310
      Hi guys,

      I am pretty new to Kyocera. Try to fix a FS-6025 with an odd problem. Copy or print jams all the time in the middle of the fuser unit.
      Remove paper close door. Machine showes wast toner bottle missing. Open close front door starts to print again. Same procedure.
      Replaced exit unit. fuser unit all boards, Developer and drum, checked all sensors OK. Any ideas much appriciated.
      Thanks
      Update the firmware?

        Comment

        • Haggy0310
          Junior Member
          • Oct 2012
          • 7
          #3
          Re: FS-6025 jamming no wast toner bottle

          Originally posted by BHRLC
          Update the firmware?
          Done the Firmware. Same problem.

            Comment

            Previous template Next
            Working...