If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Taskalfa 4550ci - it's constantly jamming of tray cassette 4, so far I've replace the roller assembly and a few shafts. I don't know what else to change, jam code is 1504, paper is not reaching to the PCS Sensor. Any ideas would help a lot...
Look carefully behind the cassettes and horizontal tray for trapped paper. It will be stuck in the upper left corner. It is easy to miss. You can remove #3 feed unit to get to it if your arms are too short. Lol.
Comment