maintenance mode fs1130mfp

[drolfe@webmail.co.za]

im having problems with the maintenance mode i used 10971087 and it gets into maintenance mode but i can only access a few codes and not the one i want to access, any ideas as to why

[copymech]

Re: maintenance mode fs1130mfp

Many of the service modes are not available on the fs models. You ment 10871087 .

[drolfe@webmail.co.za]

Re: maintenance mode fs1130mfp

yes i meant 10871087, i am having problems with the scanning when they scan it is giving a yellow line on the page. The glass is clean. i did see a tech bulletin for the fs1128 and they said change U068 so i thought i will give it a try but i cant get to that code

[Zackuth]

Re: maintenance mode fs1130mfp

Whenever I get color lines on scans, I rub my thumb up and down the slit glass a few times then clean with a rag. It usually goes away the first time. I once put one of those black slit galss strips from a Saturn series machine on an FSC2126 and got the customer's constant line issue to stop.

[drolfe@webmail.co.za]

Re: maintenance mode fs1130mfp

th glass was cleaned with cleaning solvent the funny thing is that it does not give the line constantly so i never know whether it is solved or not

[Zackuth]

Re: maintenance mode fs1130mfp

Have you cleaned the mirrors and underside of the glass? The lines I fixed with the black strip were intermittant as well.

[drolfe@webmail.co.za]

Re: maintenance mode fs1130mfp

no i havent cleaned the mirrors will do so tommorrow thanks for the advice. not used to working on these machines as we are mainly toshiba