Kyocera FS 2020D close rear unit

[lux_tv]

Hi everyone,

having an issue with a Kyocera FS 2020d that will not recognise that the rear unit is closed- is there anything I can do to fix/override?

Thanks,

Luke

[Venom]

Re: Kyocera FS 2020D close rear unit

Take it apart and look

[stevena86]

Re: Kyocera FS 2020D close rear unit

Take it apart and look

This. Too much of this.

There should be a switch or a sensor that gets blocked when the door is closed telling the machine that the door is in fact... closed.

If the machine is not seeing that the door is closed... I think you can go from there, yeah?

[leroyal]

Re: Kyocera FS 2020D close rear unit

Check for paper scraps in the plug unit.

[MDR24]

Re: Kyocera FS 2020D close rear unit

There's a Micro switch on the left hand side (machine side), which is actuated by a metal plate which is located underneath the fuser (left side) bend the metal plate towards the machine