ECOSYS M6526cdn

[occus]

Hi

Have somebody some experience about sleep timer and standby from the modell ECOSYS M6526cdn?
My machine goes sometime not in standby... the display is dark and everything looks good but the fuser is hot and the fan is running...

... timer adjustments are ok, 10min and 15min. But in the morning after a night without prints the fan is running.

[DWise]

Re: ECOSYS M6526cdn

Is it not possible to power the machine down daily?

[occus]

Re: ECOSYS M6526cdn

Hi, yes i'm sure that will help... but there is a fax inside and it is difficult to explain to the customer
I'm wondering if other machines have the same problem. I only have once and many from the old series fs-c2126mfp but there are no standby problems.

The support from Kyocera is not really helpful, they have no idea. (never heard from this problem... always the same)

[DWise]

Re: ECOSYS M6526cdn

Hi, yes i'm sure that will help... but there is a fax inside and it is difficult to explain to the customer
I'm wondering if other machines have the same problem. I only have once and many from the old series fs-c2126mfp but there are no standby problems.

Hey, it was worth a shot!