If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
FS1128MFP PCB that the exposure lamp plugs into has a blown capacitor next to the plug where the exposure lamp connects. Hytec doesn't repair the scanner assemblies any more. Kyocera doesn't sell the PCB board. Any sources?
The board you are referring to could never be ordered separately. You have to order entire scanner assembly, or just take the board from another machine.
The board you are referring to could never be ordered separately. You have to order entire scanner assembly, or just take the board from another machine.
Yes the scanner PWB can be ordered separately, but the exposure lamp is part of the ISU assembly and the inverter board is also located in the ISU and no separate part number is available for the inverter board.
Comment