Was wondering if anyone has any info and this F245 error code on the Kyocera FS-4100DN printer.. It is not listed in service manual and very little info online.. Also Kyocera has or provides any technical assistance... Any help would be appreciated..
-
Last edited by Bolivia; 05-19-2015, 07:29 PM. -
Re: Kyocera FS-4100DN F245 Error ...
If it's not in the manual I'd suspect it to be a firmware or communication error. Most likely from a corrupt print job. Disconnect the ethernet cable and reboot. If it works with ethernet unplugged the issue is on their end. -
Re: Kyocera FS-4100DN F245 Error ...
F245 (possibly CF245) is often just corrupt print data, try different driverComment
-
Re: Kyocera FS-4100DN F245 Error ...
We have seen this as a print error possibly caused by a corrupt data file ; usually from a WEB-BASED print job .
Kyocera has a Firmware up-grade that should correct this error.
You should also clear all print jobs sent to this printer ."The Serenity Prayer" . . .
God grant me the serenity to accept stupid people , the courage to not waste my time and energy on them , and the wisdom to know that I cannot fix STUPID .Comment
Comment