kyocera taskalfa 300ci

[Guest]

WOW! recently found out about smarka. what a surprise.
Glad I found y'all. I've never posted a question on this site.
This is a valuable resource for me.

IT was suggested (no names) I do a "U410 or U411 auto scan adjust" for this machine. (B/W a little faint).
So, I accidentally/on purpose started procedure before realizing you have to have the "test charts" to do it. didn't READ INSTRUCTION details. DUMB, I should know better.
I have the manuals. (for what it's worth)

Machine will print & receive fax fine.
WILL NOT scan or copy. solid black image. HELP!!

Anyway, was hoping someone out there could help me find/get these adjustment charts.
Part #'s are:302FZ56990, 302AC68243, 303JX57010, 303JX57020.

Or maybe someone knows a better way to get the scanner working again.

Thanks everybody.
Terry

[copygirl]

Re: kyocera taskalfa 300ci

Hey Terry. We all learn the hard way don't we. Don't know if you've tried U002 or U021. The first restores the machine to factory default settings and the second initializes the memory. You better back it up with U917 before you do anything and print out a maintenance report so you don't cause yourself any more problems. You could just order the charts from a Kyocera Dealer but beware they are pricey. Don't have a total for you but thought you might want to see if you can get it back to default first. Hope this helps. Ginger

[twgreen/ossc]

Re: kyocera taskalfa 300ci

Thanks copygirl.
got chart, did procedure and all is well.
only needed the color chart.
Terry