Muratec MFX-1330 compatibility with other brands

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mrwho
    Major Asshole!

    Site Contributor
    2,500+ Posts
    • Apr 2009
    • 4299

    #1

    Muratec MFX-1330 compatibility with other brands

    Hello there, guys and gals.

    As I posted in this other thread, I need a network card for a Konica Minolta bizhub 130f. I'd like to know if the parts from Muratec are compatible with the KM machine.

    Thanks in advance for any help you can provide.

    Cheers!
    ' "But the salesman said . . ." The salesman's an asshole!'
    Mascan42

    'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

    Ibid

    I'm just an ex-tech lurking around and spreading disinformation!
  • KyoceraChris
    Trusted Tech

    100+ Posts
    • Jun 2009
    • 112

    #2
    even tho they may look similar to some other brands, muratec is muratec.. the only other name im aware of that they were also sold under is imagistics and maybe some other off brands.. need any support let me know..
    you gunna eat yo corn bread?!?

    Comment

    • mrwho
      Major Asshole!

      Site Contributor
      2,500+ Posts
      • Apr 2009
      • 4299

      #3
      Originally posted by KyoceraChris
      even tho they may look similar to some other brands, muratec is muratec.. the only other name im aware of that they were also sold under is imagistics and maybe some other off brands.. need any support let me know..
      Well, I know for a fact that the Konica Minolta bizhub 130f is a rebranded Muratec. I just need a network card to go with it. Just wondering about the possible compatibility of Muratec parts with the Konica Minolta machine.
      ' "But the salesman said . . ." The salesman's an asshole!'
      Mascan42

      'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

      Ibid

      I'm just an ex-tech lurking around and spreading disinformation!

      Comment

      • KyoceraChris
        Trusted Tech

        100+ Posts
        • Jun 2009
        • 112

        #4
        i dont see why it would have an problems, i have interchanged the imagistics parts and supplys with muratec...
        you gunna eat yo corn bread?!?

        Comment

        • mrwho
          Major Asshole!

          Site Contributor
          2,500+ Posts
          • Apr 2009
          • 4299

          #5
          Thanks for your feedback. I'll see what we can get.

          Cheers!
          ' "But the salesman said . . ." The salesman's an asshole!'
          Mascan42

          'You will always find some Eskimo ready to instruct the Congolese on how to cope with heat waves.'

          Ibid

          I'm just an ex-tech lurking around and spreading disinformation!

          Comment

          Working...