Muratec MFX 1700/ Imagistics DL 170?

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jpcopy
    Trusted Tech

    250+ Posts
    • Apr 2006
    • 256
    #1

    Muratec MFX 1700/ Imagistics DL 170?

    Imagistics DL 170-I have a chance to buy some of these machine cheap. They are suppose to cross to the muratec MFX 1700. Are these good machines. Are they a cartridge machine? What is the average copy cost?
    Any particular problems. Some have low meters(less than 50k) and some are above 200k. Any info would be appreciated
    jp
    Tags: 170, 1700, 1700 or, 200, 2006, 700, available, bad, drum, edited, good, imagistics, less, line, mfx, muratec, muratecs, purchase, strange, toner, unit, weird
    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9919
      #2
      Re:Muratec MFX 1700/ Imagistics DL 170?

      The parts and service manual for this machine is available for purchase at http://www.justmanuals.com/product_i...oducts_id=9559

        Comment

        • jpcopy
          Trusted Tech

          250+ Posts
          • Apr 2006
          • 256
          #3
          Re:Muratec MFX 1700/ Imagistics DL 170?

          I may be interested in manuals and tec info after I have heard some feed back form tech who have these units in the field
          jp

            Comment

            • dqydj
              Technician

              50+ Posts
              • Jun 2005
              • 65
              #4
              Re:Muratec MFX 1700/ Imagistics DL 170?

              I guess they aren\'t to bad. we have quite a few of these out there.
              most of them run pretty good. Have had some strange problems with some of them but all in all they are ok.
              they do use a drum unit and a toner unit.

              Post edited by: dqydj, at: 2006/05/15 16:51

                Comment

                • bamadog
                  #5
                  Re:Muratec MFX 1700/ Imagistics DL 170?

                  I agree with dqydj. The Muratecs I have worked on were O.K. but did have an a few weird problems sometimes. Muratec help line is pretty good in my experiences with them.

                    Comment

                    • jpcopy
                      Trusted Tech

                      250+ Posts
                      • Apr 2006
                      • 256
                      #6
                      Re:Muratec MFX 1700/ Imagistics DL 170?

                      Thanks to all that replied. Probably going to try a few
                      jp

                        Comment

                        Previous template Next
                        Working...