mfx-2850

[Donnie]

Does anyone have a part number for the mylar pieces covering the ends of the mag roller. They always wear through and our only option has been replacing the entire dv unit. Gets expensive. Thanks.

[JustManuals]

Re: mfx-2850

This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


Paul@justmanuals.com

[krm]

Re: mfx-2850

Does anyone have a part number for the mylar pieces covering the ends of the mag roller. They always wear through and our only option has been replacing the entire dv unit. Gets expensive. Thanks.

I don't know if the mylars are available. I will check. There is a guy named Hansoon who posts in the Konica-Minolta section all the time. He has updated collars which greatly improve the life of the dev. unit. This Muratec is a Konica-Minolta engine and dev. tank. It is easy to install on a new tank and they are fairly priced.

[Donnie]

Re: mfx-2850

Thanks for the reply. Do you know what model Konica Minolta it is?

[SmellsHot]

Re: mfx-2850

Bizhub 200, 250, 350 or 222, 282, 362