Im working on a OCE Copier Model 6020
Funny thing when cold Or started its printed 15 copies no issue, then after fully warming up or after the first print after sitting for a day I get Warming up all the time I can leave it sitting for 30 minutes
and Nothing never goes back to ready, Ive swapped out with another fuser(unknown condition) did the same thing, I have one more fuser to try. This machine is like a bizhub 750.
All lamps comes on. so its not a lamp issue.
Keep Warming Issue
Can someone shed some light, I dont need a manual I Need some pointers.
Im thinking the thermistor or the thermostats
But i get no error i did get a 3208 I think it was.
I have one more fuser to try.
Thanks For any help!
Arcadian
Funny thing when cold Or started its printed 15 copies no issue, then after fully warming up or after the first print after sitting for a day I get Warming up all the time I can leave it sitting for 30 minutes
and Nothing never goes back to ready, Ive swapped out with another fuser(unknown condition) did the same thing, I have one more fuser to try. This machine is like a bizhub 750.
All lamps comes on. so its not a lamp issue.
Keep Warming Issue
Can someone shed some light, I dont need a manual I Need some pointers.
Im thinking the thermistor or the thermostats
But i get no error i did get a 3208 I think it was.
I have one more fuser to try.
Thanks For any help!
Arcadian