OCE plan Printer "Conditioning Error"

[TCA TECH]

[NorthW]

Re: OCE plan Printer "Conditioning Error"

If you had blank prints previously, reseated connections and now it stops, perhaps the transfer separation corona isn't in correct position or its wire is broken? Sorry I don't have access to the service manual.

[TCA TECH]

Re: OCE plan Printer "Conditioning Error"

If you had blank prints previously, reseated connections and now it stops, perhaps the transfer separation corona isn't in correct position or its wire is broken? Sorry I don't have access to the service manual.

Thanks Mate

[tommygun]

Re: OCE plan Printer "Conditioning Error"

yeaha check the coronas first, but i've also had broken waste orgas do some strange errors, and make sure the drum sits in correctly with the drive gear and the dev isn't to loose or tight

[TCA TECH]

Re: OCE plan Printer "Conditioning Error"

yeaha check the coronas first, but i've also had broken waste orgas do some strange errors, and make sure the drum sits in correctly with the drive gear and the dev isn't to loose or tight

thanks

[imran khan]

Re: OCE plan Printer "Conditioning Error"

ok checked the toner dosage toneris not pumping may be toner dosage where put toner one spring going to developer unit that spring is broken otherways toner dasage motor problem toner is not pumping ok sir if everthing is ok put some toner 100mile toner put in the developer unit becose if there is no toner in side developer unit conditioning & paper jam


with best regards imran khan oce

[imran khan]

Re: OCE plan Printer "Conditioning Error"

checked toner dosage toner is not pumping
if toner dosage ok put some 100 mile toner in side developer unit

with best regards imran khan oce

[imran khan]

Re: OCE plan Printer "Conditioning Error"

please check toner dosage toner is not pumping other ways put some toner inside developer unit 100 mile. but check toner dosage toner tank may be spring broken or motor problem ok sir please let me know


with best regards imran khan oce

[TCA TECH]

Re: OCE plan Printer "Conditioning Error"

Well i did sort it out. So much for the OCE expert who came on a 2 hour drive and actually caused the issue.
With your help and my knowledge of copiers i just started to follow the process of fault finding to find the toner motors were not plugged in.
Pays to know these things. And will service it my self from now on
thanks for tall the feedback guys