Duplo DP205 master problem

[petrus]

my duplo dp205 the master lenght cut not normal.and the machine show "master feed miss"
the master very short.
I ve change the master sponge roller and service everything on master feed
assemblly and the result still the same.
one thing I have try is to change the sponge roller from known alive machine, comewith the end sensor and its ok,normal.
Is it have any setting to stick this end sensor sticker?because after I change the roller and the sensor there >the machine going mad.


THERE ARE MULTI COPYTECH AROUND THE WORLD.....
.\\//.
8818 MY CUTE CAR

[techathens]

This seems to be a common or reoccurring issue on the 205, 21 and 21L. I'll research it and see what we did to correct the issue.

[petrus]

this machine already done today.the solution is
I loosen alittle bit the drive belt tension,and lubricate the master holder clamp.that all.