help w/ Savin MP C 4503 service mode

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jper34
    Trusted Tech

    Site Contributor
    100+ Posts
    • Sep 2011
    • 225
    #1

    help w/ Savin MP C 4503 service mode

    Hey Folks,
    I know I have accessed it before, and it is different to getting into service mode for Savin MP C 4503 series, versus the Ricoh series.. I will be replacing the drum and developer unit, the mechancal part is easy, if I remember, but there was a trick to access service mode..so , hoping you folks can help me get into the service mode...Any help greatly appreciated...Thanks in advance...


    Jaime
    Indep. Copier Svc.
    CT.
    Tags: mode, savin, series, service
    • Tonerbomb
      AutoMajical Resolutionist

      Site Contributor
      2,500+ Posts
      • Feb 2005
      • 2589
      #2
      Re: help w/ Savin MP C 4503 service mode

      Originally posted by jper34
      Hey Folks,
      I know I have accessed it before, and it is different to getting into service mode for Savin MP C 4503 series, versus the Ricoh series.. I will be replacing the drum and developer unit, the mechancal part is easy, if I remember, but there was a trick to access service mode..so , hoping you folks can help me get into the service mode...Any help greatly appreciated...Thanks in advance...


      Jaime
      Indep. Copier Svc.
      CT.
      It is exactly the same for Savin and Ricoh boxes, unless someone went into service mode and actually changed the access code. The new code Ricoh uses can be searched for in the forum.
      Mystic Crystal Revelations

        Comment

        • jper34
          Trusted Tech

          Site Contributor
          100+ Posts
          • Sep 2011
          • 225
          #3
          Re: help w/ Savin MP C 4503 service mode

          Originally posted by Tonerbomb
          It is exactly the same for Savin and Ricoh boxes, unless someone went into service mode and actually changed the access code. The new code Ricoh uses can be searched for in the forum.
          I did find access..it is different from other Ricoh models, it's "reset", 806182, "clear"(hold "clear" button down for a few seconds)..in case
          anyone may need to get into service mode, on this unit..

            Comment

            Previous template Next
            Working...