Hp DesignJet T120 orange power button

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • chemicalx50
    Technician
    • Apr 2014
    • 27

    Hp DesignJet T120 orange power button

    Hey guys,

    Got a Hp Designjet T120 that doesn't power on... when the power button is pressed it only turns orange and makes a beeping sound.

    mainboard was changed and power supply no change in error message.
  • GIUBOSS
    Service Manager
    Site Contributor
    1,000+ Posts
    • Jul 2013
    • 1318

    #2
    Re: Hp DesignJet T120 orange power button

    Originally posted by chemicalx50
    Hey guys,

    Got a Hp Designjet T120 that doesn't power on... when the power button is pressed it only turns orange and makes a beeping sound.

    mainboard was changed and power supply no change in error message.
    Does the display light up? I didn't understand if you replaced the power supply or not ...

    Comment

    • chemicalx50
      Technician
      • Apr 2014
      • 27

      #3
      Re: Hp DesignJet T120 orange power button

      Display doesn't light up and yes I replaced power supply also.... i just discovered a flat/flex cable with a missing contact I'll be replacing it today and report back

      Comment

      • GIUBOSS
        Service Manager
        Site Contributor
        1,000+ Posts
        • Jul 2013
        • 1318

        #4
        Re: Hp DesignJet T120 orange power button

        Originally posted by chemicalx50
        Display doesn't light up and yes I replaced power supply also.... i just discovered a flat/flex cable with a missing contact I'll be replacing it today and report back
        hello, by chance did you solve with the flat cable?

        Comment

        • chemicalx50
          Technician
          • Apr 2014
          • 27

          #5
          Re: Hp DesignJet T120 orange power button

          Hey, no I havent!

          I'm thinking both mainboard and power might be shot 😔🤔 I'm thinking I should have replaced both at the same time and not one at a time!

          But I'm still trying to figure it out.

          Comment

          Working...