Develop INEO+650 bad prints

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • frank.givskud
    Junior Member
    • Jun 2008
    • 5
    #1

    Develop INEO+650 bad prints

    Hello out there...

    I have a Develop INEO+650 with Fiery. When I print there is a lot of noise on the document. I've have also tried to disconnect the Fiery, but the result is the same. See attached PDF file to see the problem. There is not a problem with copying!
    Attached Files
    Tags: 650, attached, bad, bad print, copyi, copying, develop, disconnect, document, ect, fiery, file, konica, konica minolta, minolta, nec, noise, pdf, print, prints, result, system
    • sbillis
      Technician

      50+ Posts
      • Nov 2008
      • 95
      #2
      Originally posted by frank.givskud
      Hello out there...

      I have a Develop INEO+650 with Fiery. When I print there is a lot of noise on the document. I've have also tried to disconnect the Fiery, but the result is the same. See attached PDF file to see the problem. There is not a problem with copying!
      what do you mean when you say that tried to disconnect Fiery but the same?
      How you can print without RIP?

      Try to reinstall Fiery system?
      Problem appears in all printouts or on specific file?
      Check cables?
      Power source?

      check your problem also in Konica Minolta
      Konica Minolta

        Comment

        Previous template Next
        Working...