Most hated copier brand and model!!!

[tinnyjay]

Hello!
Which is your most hated copier brand and model and why.
Mine are Sharp,Panasonic and KM because i dont know them too much

[KEITH.MAX]

Hello!
Which is your most hated copier brand and model and why.
Mine are Sharp,Panasonic and KM because i dont know them too much.

[slybot]

Hello!
Which is your most hated copier brand and model and why.
Mine are Sharp,Panasonic and KM because i dont know them too much

xerox.. for at least one reason is that their service manuals a complete crap and they dribble in nonsensical 'xeroxspeak' which makes no sense, and they make up words......... "corotron"???? no such thing!

[OMD-227]

You'll find alot of manuals speak like that...... mainly because they are a translation of the Japanese or Chinese version for the English market.

I've seen some classic examples over the years..... One that comes to mind is a 'Lump Unit' for a scanner lamp.

[slybot]

You'll find alot of manuals speak like that...... mainly because they are a translation of the Japanese or Chinese version for the English market.

I've seen some classic examples over the years..... One that comes to mind is a 'Lump Unit' for a scanner lamp.

'lump unit'??? holy snapping duck shit batman.............never heard it called that before wazza.. i should have been a bit clearer though, i was actually referring to the lack of basic english. (acronyms) like 'fip' 'rap' 'crum' 'cru' (and trust me) it goes on like this. i got shown the 'acronym' book. it was as thick as an encylopedia......... at the end of the day you have to go WTF are they talking about

[tinnyjay]

Hello!
Which is your most hated copier brand and model and why.
Mine are Sharp,Panasonic and KM because i dont know them too much.

Hey "me",how r u?

[tinnyjay]

Just forgot to say :
" I am an english man from New York" :P

[nmfaxman]

Sharp because they are made by Mattel.
Pressed aluminum and cheap plastic.

Xerox, just because it is in my opinion the X brand.
Xpect them to charge big money because of the name.
Xpect them to make the machines a pain to work on.
Xpect them to not work well, to create calls.
Don't blame the X manuals on the Japanese.
These are American POS's all the way.
So, I guess my most hated is Brand X.

[vincent64]

Brands I hate, despise, loath, Konica-Minolta and Toshiba, KM cause I dont understand there codes and such, Toshiba, are just plain cheap, most units are not well made, afraid I am going to break something working on it.

[b003ace]

Worst brand

Toshita, the product is shit, the manuals are shit, and their dealers are all subsidiary now.

[kingpd@businessprints.net]

Xerox: hate their company and attitude more than anything. I liked some of the older tanks they made but doesn't matter b/c hard to service them.
Toshiba: I've never seen bigger pieces of crap, love "Toshita" btw. and the cost of some parts, b*tch please.
HP: expensive as hell, plastic crap; have some of that Xerox mentality.
Sharp/Ricoh/Savin/Gestetner/Lanier/IBM: hate in part b/c they were big implementing the first cheaper plastic pieces of sh*t. Ricoh is annoying as hell to deal with...too big I think.

[montana]

hi..it is canon ir1605..the most hated one to me..it is a bad quality

[toshibadale]

I think Toshiba's are good units. The part's and supplies are higher than heck, but if you double the PM counters, or turn them off, they will run a long time.....EXCEPT for the feed tires. Total crap are these pieces of rubber. They do produce some of the best copies I've seen.

[bojans]

xerox.. for at least one reason is that their service manuals a complete crap and they dribble in nonsensical 'xeroxspeak' which makes no sense, and they make up words......... "corotron"???? no such thing!

That's why I love them

[bojans]

I think Toshiba's are good units. The part's and supplies are higher than heck, but if you double the PM counters, or turn them off, they will run a long time.....EXCEPT for the feed tires. Total crap are these pieces of rubber. They do produce some of the best copies I've seen.

I have to agree with you. Toshiba's that I've seen so far are good and reliable machines. I've seen models 16-22 copies made over 300K without any service.