Re: oki c5850 need firmware
Pleass send me at spouriklas@mail.vu the hostif.exe file. Thank you.
oki c5850 need firmware
Collapse
X
-
Guest replied -
Guest repliedLeave a comment:
-
Guest repliedRe: oki c5850 need firmware
Sure, just sent you a link.. check your emails/spam folder!Leave a comment:
-
Guest repliedRe: oki c5850 need firmware
Leave a comment:
-
Guest replied -
-
Guest repliedRe: oki c5850 need firmware
Hi, i need to firmware c5850, can you help? Thanks.Leave a comment:
-
Re: oki c5850 need firmware
Hi.
Please send me this PJL_p0401_w0401_cA100_aA102.bin firmware, and hostif util.
white.and.ghost@gmail.com
Thank you!
Would you like that gift wrapped too with a pink bow???
Wha tis it that YOU are offering the board besides your prescense?
Leave a comment:
-
Guest repliedRe: oki c5850 need firmware
Hi.
Please send me this PJL_p0401_w0401_cA100_aA102.bin firmware, and hostif util.
white.and.ghost@gmail.com
Thank you!Leave a comment:
-
Guest repliedRe: oki c5850 need firmware
Hi Can you send me the f/w for the 5650 please!!!Hi, I also accidently formatted my Oki C5600 printer's flash and then network menu disappeared. I need a firmware file ( PJL_p0401_w0401_cA100_aA102.bin ) for C5600. I found the firmware file for C5650 but I don't know that will be suitable.. Can anyone help me for this issue ? Thanks,Leave a comment:
-
Guest repliedRe: oki c5850 need firmware
Hi There
Will this work on all Oki Printers I have an OKI MC561 and I did a dump thing and Formatted thge Flash Memory whist I was in diagnostic Mode. Now my network settings are not saved.
Bueno
Leave a comment:
-
Guest repliedRe: oki c5850 need firmware
This has just fixed my OKI c5650 in less than a minuteNetworking capability back online!
Thank you sooooooo much for posting up the files!!Leave a comment:
-
Guest repliedRe: oki c5850 need firmware
Sorted! got the firmware file and the upload program, worked perfectly, network back!
Attached the firmware and hostif files. (you might have to rename the 'copy of hostif' file to .exe)
1. Connect the printer via USB and run the program HostIF.exe
2. Select Connection>If Connection>USB, the printer name should appear (C5600/C5800)
3. Select File Management>Block Transmission>Fileselection and load PJL_p0401_w0401_cA100_aA102.bin
4. Select transmission and the file will be sent to the printer.
5. LCD will display “Data Arrive” then “FW Loading”. The LCD will eventually return to “ON_LINE”.
6. Power cycle the printer.
Stubo135Last edited by Aneurysm; 04-30-2012, 06:46 PM. Reason: Attachments removed, please use email to trade such files in the futureLeave a comment:
-
Leave a comment: