Oce 2510 with an Admin password

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • melanie11127
    #1

    Oce 2510 with an Admin password

    I've come upon a used Oce CM2510. I can't get in to change any settings because previous owner set an administrator password. An HDD format failed to get rid of it. Any suggestions on how to clear the admin password? And then I need to figure out how to set up scan over a network. Any help with that would be greatly appreciated also. Thanks!
    Tags: change, clear, format, hdd, network, oce, password, scan, set, work
    • printertek
      #2
      Re: Oce 2510 with an Admin password

      Originally posted by melanie11127
      I've come upon a used Oce CM2510. I can't get in to change any settings because previous owner set an administrator password. An HDD format failed to get rid of it. Any suggestions on how to clear the admin password? And then I need to figure out how to set up scan over a network. Any help with that would be greatly appreciated also. Thanks!
      I work for OCE, are you trying to get in from the panel or the Web GUI? as they are different
      From the panel the default passw is "admin" from the web it is username=admin password=admin
      Unfortunately there does not appear to be a way to "reset" a forgotten password
      You can also print out a 22-6 report from the service mode amd it will show the currently set password

        Comment

        Previous template Next
        Working...