Help me- epsson LQ-300+II problem

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • nokia88
    Technician

    50+ Posts
    • Aug 2009
    • 72

    #1

    Help me- epsson LQ-300+II problem

    Hi everybody,
    epsson LQ-300+II has problem as folows:
    When power turn on, the printer beeps five long sound, and these indicator flasing:
    -Tear off (3 indicators)
    -Pause
    -Paper out.
    Pls.help me !!!
    Thanks.
  • fornerm
    Technician

    50+ Posts
    • Apr 2010
    • 82

    #2
    Re: Help me- epsson LQ-300+II problem

    Hello,
    this is from Manual:

    Turn the printer off and
    then on again. When the
    Problem does not resolve, can
    check the device to a
    possible paper jam or
    Bound ribbon. If there is no
    Jammed paper jam or ribbon
    home, consult your
    Dealer or an authorized
    Service technician. (If the
    Switch between single sheets of paper
    continuous paper and an error occurs,
    check the setting of
    Paper selection lever.)

    Printing sluggish, check this. Good Luck

    Comment

    • JustManuals
      Field Supervisor

      5,000+ Posts
      • Jan 2006
      • 9838

      #3
      Re: Help me- epsson LQ-300+II problem

      This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from

      Just Manuals ~ The Internet's largest selection of manuals ~ Instant Downloads

      Paul@justmanuals.com

      Comment

      • teobert

        #4
        Re: Help me- epsson LQ-300+II problem

        try clean all the sensors and check alignment.....

        Comment

        Working...