oce tds400

[Zorikos69]

hello!I would lkike to congratulate you for your excellent work about the the forum. I have an Oce tds400 and i want to log on as an administrator but since i don't have a lot of experience on oce products(i am a konica minolta technician) i can't so i want your help in order to enter to service mode and operations through the controller but i don't know the admin or the service operator password.Thank you in advance...

[Zorikos69]

please...anyone?at least through pm...i can give you in exchange any konica minolta info you need...

[Jack Reacher]

675756 or ser4OCE! depending on what version you have. You can't really get into "service mode" with that though (you need to hook up with a laptop with an oce host license for that) but you can change ip address etc

Good luck

[tecrem]

OCE 7051 Do I need a computer to run it

I have an OCE 7051 that I picked up in surplus, I want to be able to test it so that I can sell it. Anyhow there are 9 buttons on the top and none of them are a start/copy button. I went through the whole machine and cannot find a place to attach a computer. The system comes up ready and lets you play with all the different adjust ments but I put in the master and paper to be copied and nothing ! Please help !

[Kanini2k]

OCE 7051

Hi tecrem! It's probably the same as with the Xerox large format copiers, you feed the original and then it starts copying automatically. You don't need a computer. Maybe you have any use of the user's manual, I attach the file, it is also possible to download it directly from OCE homepage, http://downloads.oce.com
Good luck!

[tecrem]

Oce 7051

Thanks for the pdf , it was a big OE ! The sensor is in the middle of the system not on the end. What a big dummy I am !