So I tried this post on another site, KeepItPrinting and got little to no response.
The Kip C7800 that i have in the field is overtoning on magenta. a tan color is usually printing like a dark brown almost purple. I can't remember from class if there is a factory reset for the service adjustments. I know there is from an IPS point of view, just reload the software.
Also I had to adjust the DV Blade roller voltage to get rid of light splotches on the outer edges but in turn caused the machine to start dumping toner. Anyone seen that before?
Thanks.
The Kip C7800 that i have in the field is overtoning on magenta. a tan color is usually printing like a dark brown almost purple. I can't remember from class if there is a factory reset for the service adjustments. I know there is from an IPS point of view, just reload the software.
Also I had to adjust the DV Blade roller voltage to get rid of light splotches on the outer edges but in turn caused the machine to start dumping toner. Anyone seen that before?
Thanks.
Comment